Each mesh element is supplied with integrated round bars with attached eyebolts.  The mesh element can then be fastened to a sub-structure at the top (such as angle iron).

INTERMEDIATE MOUNTING

An intermediate fixing may be required to reduce the amount of deflection and loads. One way of realising this is by using HAVER wire connectors, which wrap around a tube, that is located behind the mesh. The connectors interlock with the mesh from the back. From the front of the element this mounting system is almost invisible.

BOTTOM MOUNTING

Corresponding with the top mounting a round bar is integrated into the MULTI-BARRETTE mesh. Eyebolts are incorporated to tension the panels, for example using a continuous substructure like an angle iron. The eyebolts allow accurate setting of the tension.